USBL EASYTRAK
![](/img/m/628.jpg)
Easytrak is a compact Ultra Short Baseline (USBL) system designed for the efficient tracking of underwater targets such as divers, ROVs, AUVs and tow fish.
Easytrak is a compact Ultra Short Baseline (USBL) system designed for the efficient tracking of underwater targets such as divers, ROVs, AUVs and tow fish.
SUPER Raptor is a hydraulic power generator with 18 HP twin cylinder gasoline engine. The machine is available on demand with flow rates ranging from 20 to 38 liters / min and pressures up to 210 bars, depending on the size of the pump installed (example: 30 liters at 175 bars or 38 liters at 140 bars ) .
It is a professional power source with diesel engine. Designed for tough jobs, the motor is in a capsule that absorbs noise and ensures quiet operation.
SUPER RAPTOR DUAL has a double hydraulic supply. It offers two circuits at 19 l / min each or a simple circuit at 38 l / min, both with a pressure of 140 bar.
The Hollis fin blends graceful movement, power, and bulletproof construction. Meet the new standard in diving. Version with yellow tip for high visibility.
SUPER RAPTOR is a hydraulic unit with gasoline engine and individual circuit, capable of providing different pressures and flow rates up to a maximum of 38 liters or a pressure of 175 Bar. It can also operate at: 30 l / min at 175 Bar or 38 l / min at 140 Bar.
13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.
KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.
The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.
Acoustic release beacons are used to recover or lower equipment deployed under the sea, either in shallow or continental shelf waters.
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
The Stanley CS06 Underwater Hydraulic Chainsaw features a 15-inch saw and today offers the diver a tool with the highest power-to-weight ratio underwater on the market today.
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
The DS11 Diamond Chain Saw is designed for cutting concrete underwater. It is suitable for cutting corners without overcuts and can cut walls up to 45 cm thick. Two bar lengths (38 cm and 45 cm) and two different types of chain are available. A minimum of 20 psi of water pressure is required at the saw to cool and lubricate the bar and chain.
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories
The Stanley SK58 drill is a heavy duty drill, designed for underwater operations in concrete, rock and masonry drilling.The SK58 uses industry standard drilling steels and can drill up to 6m depth. The direct motor drive drives the rotation on the 1 "x 4 1/4" hex shank of the drill steel, the rotation It can be set between 0 and 300 RPM.
The feathering on / off valve and adjustable rotation speed allows easy drill bit start-up and precise control. The high torque rotation motor drives standard 736 Skil hex carbide tipped drill bits and is capable of drilling a 2 "diameter hole up to 29" deep.
The Stanley DL07 Series drill has a 1/2-inch capacity for drilling into wood, metal, or masonry.
Stanley hydraulic impact wrenches for subsea applications are designed to meet the most stringent subsea screwdriving requirements. Their rugged design includes an integrated motor and a rugged mechanism for the tough demands of railroad maintenance. The power-to-weight ratio of this equipment has no comparison with an impact wrench of this type on the market.
Stanley hydraulic impact wrenches for underwater applications are designed for the most demanding requirements of underwater screwing. The rugged design incorporates an integrated motor and rugged mechanism for severe railroad maintenance requirements. The power to weight ratio of this equipment has no comparison with an impact wrench of this type on the market.